| 1 |
|
The (elasto)hydrodynamics of thin-film fluid flows : Applications to micromachined devices
|
| 2 |
|
3D numerical study on droplet-solid collisions in the Leidenfrost regime
|
| 3 |
|
4-Field Galerkin/least-squares method for polymer flows
|
| 4 |
|
Ab initio and semiempirical studies of molecules adsorbed on surfaces
|
| 5 |
|
Ab-initio modeling of electrochemistry in proton-exchange-membrane fuel cells
|
| 6 |
|
Accelerated weathering performance of natural fiber plastic composites and its effect on the efficacy of the maleated anhydride coupling agents
|
| 7 |
|
Acid catalysis by polyoxometalates : alkylation chemistry and deactivation
|
| 8 |
|
Acidity and sampling artifacts of PM(2.5) in Hong Kong
|
| 9 |
|
Activation of biological membrane processes in cell-free reactions
|
| 10 |
|
Activity of synthetic lung surfactants containing phospholipase-resistant phosphonolipids plus purified surfactant proteins or synthetic peptides
|
| 11 |
|
Adaptation of the deep-sea thermophile Methanocaldococcus jannaschii to extreme temperatures and pressures
|
| 12 |
|
An adaptive chemistry scheme to model reactive flow
|
| 13 |
|
Adaptive control with supervision
|
| 14 |
|
Adaptive model predictive control of a two-phase chemical reactor
|
| 15 |
|
Adaptive modeling, integrated optimization, and control of automotive paint spray processes
|
| 16 |
|
Adaptive multiscale modeling of polymeric materials using goal-oriented error estimation, Arlequin coupling, and goals algorithms
|
| 17 |
|
Adaptive run-to-run control of overlay in semiconductor manufacturing
|
| 18 |
|
Additive layer manufacturing of titanium-aluminum-vanadium by electron beam melting from powder particles : Solid, mesh and foam components study
|
| 19 |
|
Adhesion of functionalized polymersomes
|
| 20 |
|
Adhesive resin conversion and composition in the hybrid layer of the resin-dentin bond
|
| 21 |
|
Adsorbed surfactant at the solid/liquid interface : Use of adsorbed surfactant aggregates in the synthesis of electrically conducting polymers
|
| 22 |
|
Adsorption and interactions of lung surfactant lipids and proteins at air/aqueous interfaces and in aqueous solution
|
| 23 |
|
Adsorption and interfacial properties of fluids from molecular simulation
|
| 24 |
|
Adsorption and separations for methane, carbon dioxide, nitrogen and oxygen gases
|
| 25 |
|
Adsorption behavior of naphthalene onto organoclay in aqueoussolution
|
| 26 |
|
Adsorption of novel block copolymers for steric stabilization and flocculation of colloidal particles in aqueous environments
|
| 27 |
|
Adsorption of proteins and surfactants at air/water and solid/water interfaces
|
| 28 |
|
Adsorption of selected organic solvents on clay & sand by inverse gas chromatography
|
| 29 |
|
Adsorption of trace levels of arsenic and selenium from aqueous solutions by conditioned layered double hydroxides
|
| 30 |
|
Adsorption of volatile organic compounds on pore expanded mesoporous materials and MCM-41 silica
|
| 31 |
|
Adsorption of water and ethanol vapors on 3A and 4A molecular sieve zeolites
|
| 32 |
|
Adsorption-desorption behavior in heterogeneous processes involving supercritical fluid solvents
|
| 33 |
|
Advanced clay nanocomposites based on in situ photopolymerization utilizing novel polymerizable organoclays
|
| 34 |
|
Advanced components of microfluidic systems for bioanalytical applications
|
| 35 |
|
Advanced computational and machine learning tools in pharmaceutical informatics
|
| 36 |
|
Advanced informatics based approaches for data driven drug discovery
|
| 37 |
|
Advanced methods, materials, and devices for microfluidics
|
| 38 |
|
Advanced receptor model research for Pittsburgh Air Quality Study (PAQS)
|
| 39 |
|
Advances in Computational Protein Structure Prediction
|
| 40 |
|
Advances in cone penetrometry and fast gas chromatography/mass spectrometry for the sampling and analysis of subsurface pollutants
|
| 41 |
|
Advances in microreaction technology for portable fuel cell applications : Wall coating of thin catalytic films in microreactors
|
| 42 |
|
Advances in the simulation and theory of soft matter : Novel perspectives on liquids, glasses, and proteins
|
| 43 |
|
Aerosol spray pyrolysis & solution phase synthesis of nanostructures
|
| 44 |
|
Aerosol synthesis and surface functionalization of luminescent silicon nanoparticles, aerosol synthesis of magnetic nanoparticles, and kinetic Monte Carlo simulation of silicon nanoparticle nucleation
|
| 45 |
|
Affinity adsorption of viruses using small peptide ligands
|
| 46 |
|
Agent-based collaborative optimization
|
| 47 |
|
Air permit application program (Kentucky)
|
| 48 |
|
Algal biofilms, microbial fuel cells, and implementation of state-of-the-art research into chemical and biological engineeringlaboratories
|
| 49 |
|
The aligned discontinuous fiber process : extension into manufacturing
|
| 50 |
|
All-copper chip-to-substrate interconnects for high performance integrated circuit devices
|
| 51 |
|
Alternative fuels for mobile fuel cells
|
| 52 |
|
Ammonia and methane as hydrogen sources
|
| 53 |
|
Amperometric DNA sensing using wired enzyme based electrodes
|
| 54 |
|
Amperometric glucose biosensors : systematic material selection and quantitative analysis of performance
|
| 55 |
|
Anaerobic biodegradation of polycyclic aromatic hydrocarbons
|
| 56 |
|
Anaerobic wastewater treatment systems under high salinity stress
|
| 57 |
|
Analysis and control of an in situ hydrogen generation and fuel cell power system for automotive applications
|
| 58 |
|
Analysis and design of annular dies for mono- and multi-layer polymer flows
|
| 59 |
|
Analysis of carbamates by gas chromatography/quadrupole ion trap mass spectrometry (Gas chromatography, Quadrupole ion trap mass spectrometry, Pesticides, Environmental pollutants)
|
| 60 |
|
Analysis of constitutive equations of entangled polymers using flow birefringence in a time-dependent, axisymmetric flow
|
| 61 |
|
Analysis of corn-to-ethanol process for automotive applications
|
| 62 |
|
Analysis of factors influencing the performance of CMS membranes for gas separation
|
| 63 |
|
Analysis of plastics manufacturing processes for low production quantities
|
| 64 |
|
Analysis of retroviral production and transduction systems
|
| 65 |
|
Analytical and experimental investigation of closed-cycle sorption cooling systems
|
| 66 |
|
An analytical study of growth cone pathfinding
|
| 67 |
|
Analyzing and modeling of airlift photobioreactors for microalgal and cyanobacteria cultures
|
| 68 |
|
Antibody discovery and engineering using the anchored periplasmic expression (APEx) Escherichia coli display system with flow cytometric selection
|
| 69 |
|
Antibody-based membrane proteomics
|
| 70 |
|
Anticorrosion and biocompatible zeolite based coatings for tissue regeneration on metallic bioimplants
|
| 71 |
|
Apparent deactivation in the photocatalytic oxidation of gas-phase aromatic contaminants on titanium dioxide (tio(2))
|
| 72 |
|
Application and modeling of titanium oxide-supported gold nanoparticles for the preferential oxidation of carbon monoxide in excess hydrogen
|
| 73 |
|
Application of a detailed combined transport/transformation/removal model to mesoscale acid deposition
|
| 74 |
|
Application of a microfluidic T-sensor assay for the study of chemotaxis perpendicular to convective flow
|
| 75 |
|
The application of combinatorial catalysis tools to the selective catalytic reduction of nitric oxide by propylene in an excess oxygen exhaust
|
| 76 |
|
Application of data mining techniques to batch profiles for process understanding and improvement
|
| 77 |
|
Application of luminescence sensors in oxygen diffusion measurement and study of luminescence enhancement/quenching by metallic nanoparticles
|
| 78 |
|
Application of metallacycles for the synthesis of small molecules
|
| 79 |
|
Application of neural networks to fed-batch fermentation
|
| 80 |
|
Application of polyacrylamide to enhance silt fence performance
|
| 81 |
|
Application of principal differential analysis to parameter estimation in fundamental dynamic models
|
| 82 |
|
Application of supercritical fluid solvents to new technologies : development of a high-pressure surface plasmon resonance spectroscopy sensor to monitor polymer adsorption
|
| 83 |
|
Applications of dynamic light scattering in chemical engineering : polymers, proteins, and liquid crystals
|
| 84 |
|
Applications of microemulsions in producing monomers and polymers : epoxidation of soybean oil and design of polymers with regulated molecular weight and specified end-groups
|
| 85 |
|
Applications of nanotechnology in environmental engineering : arsenic removal
|
| 86 |
|
Applications of the lipidic cubic phase : From controlled release and uptake to in meso crystallization of membrane proteins
|
| 87 |
|
Applications of transcriptional profiling in the engineering of Escherichia coli for the production of anti-malarial therapeutics
|
| 88 |
|
Applications of ultrasonic Lamb waves
|
| 89 |
|
Applications of unconventional processes in polymer synthesis : supercritical fluids and sonochemistry
|
| 90 |
|
Aqueous alpha-lipoic acid solutions for removal of arsenic and mercury from materials used for museum artifacts
|
| 91 |
|
Aqueous protein adsorption at solid surfaces : surface modification and salt and sugar excipients
|
| 92 |
|
Artificial intelligence approach to classify and quantify cumulative impact of change orders on labor productivity
|
| 93 |
|
Artificial neural networks based subgrid chemistry model for turbulent reactive flow simulations
|
| 94 |
|
Ash morphology and metals distribution during combustion of de-inking sludge
|
| 95 |
|
Aspects of environmental degradation and fracture in polymer films and fibers
|
| 96 |
|
Aspects of metal and silicon-based nanomaterials : synthesis, stability and properties
|
| 97 |
|
Aspects of polymer surface science : Part A. Hydrosilation-cured polydimethylsiloxane networks. Part B. Synthesis and characterization of dual-function oxetane macromonomers
|
| 98 |
|
Assembly of peptide functionalized molecular architectures
|
| 99 |
|
Assembly, cross-linking and encapsulation using functionalized nanoparticles at liquid interfaces
|
| 100 |
|
Assessing mechanical properties from cone indentation hardness
|
| 101 |
|
Assessment of the stability and biological activity of four model proteins encapsulated in hydrogel membranes
|
| 102 |
|
Association of hydrophobically and electrostatically modified poly(ethylene glycol) with liposomes
|
| 103 |
|
Atmospheric Organic Particulate Matter : Measurements, Models and MItigation
|
| 104 |
|
Atomic Layer Deposition and Molecular Layer Deposition on Polymers
|
| 105 |
|
Atomic-scale analysis of plastic deformation in thin-film forms of electronic materials
|
| 106 |
|
Atomistic analysis of the surface reactivity, roughness, and crystallinity of plasma-deposited amorphous silicon thin films
|
| 107 |
|
Atomistic simulation of nanoporous layered double hydroxide materials and their properties
|
| 108 |
|
Atomization and rheology of mixed non-ionic and ionic polymer solutions
|
| 109 |
|
Auger photoelectron coincidence spectroscopy study of silver(100) and palladium-silver alloys
|
| 110 |
|
Autothermal reforming (ATR) for fuel cells in automotive applications
|
| 111 |
|
Batch and continuous biohydrogen production using mixed microbial culture
|
| 112 |
|
Behavior of interfacial micro-defects in aluminum and its oxide film
|
| 113 |
|
The behavioral effect of cost targets on managerial cost reporting honesty
|
| 114 |
|
Behaviour of cobalt, nickel, copper, and iron during aqueous sulfur dioxide leaching of non-ferrous smelter slag
|
| 115 |
|
Behaviour of metals in MSW incinerator fly ash during roasting with chlorinating agents
|
| 116 |
|
Benchmark data and analysis of dilute turbulent fluid-particle flow in viscous and transitional regimes
|
| 117 |
|
Beyond colloids : interparticle forces at the nanoscale and their application to self-assembly
|
| 118 |
|
Binary condensation in a supersonic nozzle
|
| 119 |
|
Bio-fuel Production by Using Integrated Anaerobic Fermentation
|
| 120 |
|
Bioanalytical applications of porous polymer monoliths in microfluidic systems
|
| 121 |
|
Bioavailability of polycyclic aromatic hydrocarbons in two estuarine sediments : decoupling biological, physical, and chemical processes
|
| 122 |
|
Biochemical investigation of the intracellular trafficking of non-viral and hybrid gene therapy vectors
|
| 123 |
|
Biochemical network modeling for application in strain optimization for bioseparation
|
| 124 |
|
BioChemistry of nitric oxide donors : therapy vs. toxicity
|
| 125 |
|
Bioconjugated nanoparticle probes for ultrasensitive dna detection
|
| 126 |
|
Bioconversion of cellulose into electrical energy in microbial fuel cells
|
| 127 |
|
Biodegradable poly(L-lactide) microparticles for pulmonary drug delivery with targeting to alveolar macrophages: Applications in treating tuberculosis
|
| 128 |
|
Biodegradation and environmental impact of lipid-rich wastes under aerobic composting conditions
|
| 129 |
|
Biodegradation of phenol and metabolic intermediates by the haloalkaliphile Halomonas campisalis in saline and alkaline solutions
|
| 130 |
|
Biodiesel forming reactions using heterogeneous catalysis
|
| 131 |
|
Biodiesel production from high free fatty acid content feedstocks
|
| 132 |
|
Biodiesel production from tall oil and chicken fat via supercritical methanol treatment
|
| 133 |
|
Biodiesel production from waste frying oil : conversion monitoring and modeling
|
| 134 |
|
Biodiesel raw material supply : alcohol
|
| 135 |
|
Biodiesel synthesis and impact of cold flow additives
|
| 136 |
|
Bioinformatics and cell-free protein expression for enzymeengineering
|
| 137 |
|
Bioinformatics-driven protein design
|
| 138 |
|
Biological activity and dynamic structure in artificial protein hydrogels
|
| 139 |
|
Biological hydrogen production via self-immobilized bacteria
|
| 140 |
|
Biomass granular feeding for gasification and combustion
|
| 141 |
|
Biomass to ethanol : Process simulation, validation and sensitivity analysis of a gasifier and a bioreactor
|
| 142 |
|
Biomethanol conversion from sugar beet pulp with pectin methyl esterase
|
| 143 |
|
Biomimesis of Intestinal Crypt Micro-topography and Extracellular Matrix Chemistry for Intestinal Cell Culture
|
| 144 |
|
Biomimetic peptide-amphiphiles for functional biomaterials
|
| 145 |
|
Biomolecular sensing with light at nanostructured surfaces
|
| 146 |
|
Biomolecule Adsorption : Materials and Fundamentals
|
| 147 |
|
Biophysical and biochemical characterization of selectin-ligand interactions pertinent to cancer metastasis and inflammation
|
| 148 |
|
Bioprocess convergence using sentinel genes for process parameter tuning
|
| 149 |
|
Bioprocessing of human embryonic stem cells for the treatment of Parkinson's disease
|
| 150 |
|
Bioprocessing strategies in improving recombinant human interleukin-3 production in Streptomyces lividans fermentation
|
| 151 |
|
Bioremediation of volatile organic compounds in a continuous stirred tank bioreactor
|
| 152 |
|
Biosensor for organophosphorus nerve agent
|
| 153 |
|
Biostability of polyurethane elastomers : pacemaker leads, effect of fatigue, and novel antioxidant stabilizers
|
| 154 |
|
Biphasic nanoparticle inks for direct write assembly of three-dimensional periodic structures
|
| 155 |
|
Birefringence and residual stresses in molded articles of amorphous polymers
|
| 156 |
|
Bismaleimide and cyanate ester based sequential interpenetrating polymer networks for high temperature application
|
| 157 |
|
Blend and surface-assisted foaming of polymers with supercritical carbon dioxide
|
| 158 |
|
Block copolymer micelles in water
|
| 159 |
|
Block copolymer surfactants in immiscible homopolymer blends
|
| 160 |
|
Block polymer membranes for selective separations
|
| 161 |
|
Boiler operation optimization for air pollution control
|
| 162 |
|
Bone marrow stromal cell invasion and bone regeneration in enzymatically-degradable osteoinductive hydrogels
|
| 163 |
|
Brownian dynamics simulation of dilute polymer chains
|
| 164 |
|
Brownian dynamics simulations of dilute polymer solutions with complex hydrodynamics
|
| 165 |
|
Brownian dynamics simulations of single-wall carbon nanotube separation by type using dielectrophoresis
|
| 166 |
|
Building materials with colloidal spheres
|
| 167 |
|
Bulk synthesis of metal oxide nanowires
|
| 168 |
|
Cadre de planification de la chaine logistique base sur la representation des procedes pour l'amelioration de la rentabilite del'industrie des pates et papiers
|
| 169 |
|
Cadre methodologique de gestion du cycle de vie applique a l'industrie papetiere
|
| 170 |
|
Calcium carbonate adhesion in paper
|
| 171 |
|
Carbide and nitride supported methanol steam reforming catalysts
|
| 172 |
|
Carbon conversion during bubbling fluidized bed gasification of biomass
|
| 173 |
|
Carbon dioxide (hydrogen sulfide) membrane separations and WGS membrane reactor modeling for fuel cells
|
| 174 |
|
Carbon dioxide adsorption on solid sorbents
|
| 175 |
|
Carbon dioxide capture with potassium-promoted HTlc at high temperature
|
| 176 |
|
Carbon dioxide foaming and high-pressure rheology of polystyrene and polystyrene/organoclay nanocomposites
|
| 177 |
|
Carbon dioxide interaction with perovskite-type oxides and their applications for oxygen separation
|
| 178 |
|
Carbon dioxide sequestration : chemical and physical activation of aqueous carbonation of magnesium-bearing minerals and pH swing process
|
| 179 |
|
Carbon dioxide-expanded liquids for separation and reaction
|
| 180 |
|
Carbon Nanofiller Reinforced Epoxy Nanocomposites
|
| 181 |
|
Carbon nanotube-based polymer nanocomposites : fractal network to hierarchical morphology
|
| 182 |
|
Carbon nanotube/polymer composites and novel micro- and nano-structured electrospun polymer materials
|
| 183 |
|
Carbon Nanotubes and Carbon Nanotube Fiber Sensors : Growth, Processing and Characterization
|
| 184 |
|
Carbon oxides free fuel processing for fuel cell applications
|
| 185 |
|
Carbon-13 metabolic flux analysis of soybean central carbonmetabolism : response to temperature and genotype effects
|
| 186 |
|
Carboxylate Precursor Effects on MOD Derived Metal Oxide (Nickel/Nickel Oxide ) Thin Films
|
| 187 |
|
Catalysis of propane oxidation and premixed propane-air flames
|
| 188 |
|
Catalytic and surface properties of nanocrystalline gold water gas shift catalysts
|
| 189 |
|
Catalytic dechlorination of volatile organic carbons under redox conditions
|
| 190 |
|
Catalytic growth of single wall carbon nanotubes in metal incorporated MCM-41 and their applications
|
| 191 |
|
Catalytic hydrogenation of an aromatic sulfonyl chloride into thiophenol
|
| 192 |
|
Catalytic methane reformer for a proton exchange membrane fuel cell
|
| 193 |
|
Catalytic selectivity in alcohol organosolv pulping of spruce wood
|
| 194 |
|
Causes of primary air port tube temperature excursions in recovery boilers
|
| 195 |
|
A cell-free approach to virus-like particle production and artificial post-translational modification
|
| 196 |
|
Cell-free protein synthesis of proteins that require disulfide bonds
|
| 197 |
|
Cell-free synthesis of integral membrane proteins
|
| 198 |
|
Cellular aggregation, platelet activation andvon Willebrand factor self-association under hydrodynamic flow
|
| 199 |
|
Cellular engineering strategies for improvement of mammalian cell phenotypes in commercial applications
|
| 200 |
|
Cellular processes involved in epidermal morphogenesis and wound repair and regeneration
|
| 201 |
|
Centralized and decentralized approaches for supply chain management based on dynamic optimization and control
|
| 202 |
|
CFD simulations of mixing phenomena in binary fluidized bed
|
| 203 |
|
Cfd simulations of particulate two-phase and three-phase flows
|
| 204 |
|
Chacterizing paper coating structure using scanning probe microscopy
|
| 205 |
|
Characteristics and applications of high pressure microplasmas
|
| 206 |
|
Characteristics of gas-liquid two-phase flow in the anode flow field of liquid feed direct methanol fuel cells
|
| 207 |
|
Characterization and compatibilization of cocontinuous polymer blends
|
| 208 |
|
Characterization and control of exfoliation in melt-processed nanocomposites of polypropylene and clay
|
| 209 |
|
Characterization and engineering of a thermophilic chaperone to improve enzyme stability in denaturing co-solvents
|
| 210 |
|
Characterization and evaluation of bimetallic catalysts prepared by electroless deposition
|
| 211 |
|
Characterization and simulation of a lithium hydroxide sorbent bed for life support applications
|
| 212 |
|
Characterization and source apportionment of urban particulate matter
|
| 213 |
|
Characterization and source identification of ambient aerosols at Tonto National Monument using trajectory clustering and attenuated total reflectance Fourier transform infrared spectroscopy
|
| 214 |
|
Characterization of 6111-like aluminum alloys using electrochemical techniques and electron microscopy
|
| 215 |
|
Characterization of a starch based desiccant wheel dehumidifier
|
| 216 |
|
Characterization of beta-amyloid aggregation and its modulation
|
| 217 |
|
The Characterization of Bovine Adipose-Derived Stem Cells in Conventional and Co-culture Environments for Tissue Engineering
|
| 218 |
|
Characterization of cathodic and anodic processes associated with crevice corrosion under thin electrolyte films
|
| 219 |
|
Characterization of colloidal nanoparticle aggregates using light scattering techniques
|
| 220 |
|
Characterization of comb polymer Kypam for enhanced oil recovery
|
| 221 |
|
Characterization of cryogenic microcracking in carbon fiber/epoxy composite materials
|
| 222 |
|
Characterization of DNA-functionalized surfaces for microarray and biosensor applications
|
| 223 |
|
Characterization of flow-induced structures in carbon nanotube suspensions
|
| 224 |
|
Characterization of Fuel-Cell Diffusion Media
|
| 225 |
|
Characterization of hydrodynamic forces and interfacial phenomena in cell culture processes
|
| 226 |
|
Characterization of hydrogen-[iron]zsm-5 and an investigation of adsorption complexes formed in acylation reactions over zeolite acids
|
| 227 |
|
Characterization of mass transport processes to enable PEM fuel cell start-up from low temperatures
|
| 228 |
|
The characterization of octafluorocyclobutane-based plasma discharges for the selective etching and processing of silicon dioxide and low-K dielectric thin films
|
| 229 |
|
Characterization of phase equilibrium associated with heterogeneous polymerizations in supercritical carbon dioxide
|
| 230 |
|
Characterization of plastics, carbon black filled rubbers and biodegradable polymers by ultrasonic techniques
|
| 231 |
|
Characterization of Polymer Resins and Magnetic Particles for Biofuel Recovery via Solid Phase Extraction
|
| 232 |
|
Characterization of protein glycoforms in cellobiohydrolases and endoglucanases from trichoderma reesei rut-c30 and mutant strains using capillary isoelectric focusing and mass spectrometry
|
| 233 |
|
Characterization of proton exchange membrane fuel cell and pem electrolyzer using non-steady state electrochemical techniques
|
| 234 |
|
Characterization of reactant gases, water and heat distributions in proton-exchange-membrane fuel cells
|
| 235 |
|
Characterization of receptor-mediated interactions in inflammation and cancer metastasis under flow
|
| 236 |
|
Characterization of shear stress response in two distinct physiological systems
|
| 237 |
|
Characterization of solids isolated from different oil sand ores
|
| 238 |
|
Characterization of the phase behavior and elastic properties of surfactant bilayers
|
| 239 |
|
Characterization of the thermodynamics and deformation behavior of styrene-butadiene-styrene grafted with polyhedral oligomeric silsesquioxanes
|
| 240 |
|
Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359 + 20% silicon carbide metal-matrix composite
|
| 241 |
|
Characterizing reaction and transport processes in an electrolytic reactor for in situ groundwater treatment
|
| 242 |
|
Chemical and Electrochemical Investigation of a Carbonate Selective Catalyst and a Room Temperature Carbonate Fuel Cell
|
| 243 |
|
Chemical and statistical soot modeling
|
| 244 |
|
Chemical applications of microfluidics
|
| 245 |
|
Chemical degradation of methyl tert-butyl ether (MTBE) by Fenton reagent
|
| 246 |
|
Chemical engineering of nanoshell chemical reactors
|
| 247 |
|
Chemical fluid deposition : reactive deposition of thin metal films from supercritical carbon dioxide solutions
|
| 248 |
|
Chemical modification of cellulose fibers and their orientation in magnetic field
|
| 249 |
|
A chemical reaction engineering perspective of polymer electrolyte membrane fuel cells
|
| 250 |
|
Chemical reactor networks for combustion systems modeling
|
| 251 |
|
Chemical surface modification of thin film polymers
|
| 252 |
|
Chemical vapor deposition and characterization of zirconia films for high-k dielectric applications
|
| 253 |
|
Chemical vapor deposition and characterization of zirconium tin titanate as a high dielectric constant material for potential electronic applications
|
| 254 |
|
Chemical vapor deposition of carbon nanostructures and carbon nanotubes-reinforced composites
|
| 255 |
|
Chemical vapor deposition of thin films for diffusion barrier applications
|
| 256 |
|
Chemical vapor deposition of yttria-stabilized zirconia as a thermal barrier coating for gas turbine engines
|
| 257 |
|
Chemical-mechanical polishing of metal and dielectric films for microelectronic applications
|
| 258 |
|
The chemistry of arsenic and mercury under post-combustion conditions
|
| 259 |
|
Chemotaxis impact on microbial transport in a packed column with structured physical heterogeneity
|
| 260 |
|
Child care teachers' attitudes, beliefs, and knowledge regarding science and the impact on early childhood learning opportunities
|
| 261 |
|
Chinese floral art : a vehicle for cultural awareness
|
| 262 |
|
Chromatographic measurement of protein-protein interactions
|
| 263 |
|
Chronic shear stress effects on endothelial cell response
|
| 264 |
|
Circulating fluidized bed reforming process for hydrogen production from methane
|
| 265 |
|
Clay-tethered thermoplastic polyurethane nanocomposites by bulk polymerization methods
|
| 266 |
|
Cloned gene integration in recombinant yeast and application to metabolic engineering
|
| 267 |
|
Clouds and climate : Ability of atmospheric particles to uptake water
|
| 268 |
|
Co-continuous polymer blends
|
| 269 |
|
Co-doping of CVD diamond with boron and sulfur
|
| 270 |
|
Coarse-grained cytoskeleton and filament simulations and mimicry with polymer worm micelles
|
| 271 |
|
Coating with deformable and permeable surfaces : Focus on rotary screen coating
|
| 272 |
|
Cobalt post-doping of solid oxide fuel cell cathodes
|
| 273 |
|
Colloidal and Brownian forces in protein crystal growth
|
| 274 |
|
Colloidal aspects of chemical mechanical planarization (CMP)
|
| 275 |
|
Colloidal assembly at fluid interfaces for advanced materials synthesis
|
| 276 |
|
Colloidal Dispersions in Polymeric Media : Interparticle Forces, Microstructure and Rheology
|
| 277 |
|
Colloidal gel and its application in tissue engineering
|
| 278 |
|
Colloidal gold/polyethylenimine formulations for gene delivery
|
| 279 |
|
Colloidal nanocrystals : synthesis and shape-control, interparticle interactions and self-assembly
|
| 280 |
|
Colloidal silica films for high-capacity DNA arrays
|
| 281 |
|
Colloids at fluid interfaces : structure, dynamics, and droplet stability
|
| 282 |
|
Combinatorial synthesis and screening of fuel cell catalysts
|
| 283 |
|
Combined modeling and experimental approaches for the rational design of intratumoral drug delivery systems
|
| 284 |
|
Combustion and chemical kinetics study of jet fuel, biogas and solid fuel in diffusion flames
|
| 285 |
|
Combustion and gasification of chars in oxygen and carbon dioxide at elevated pressure
|
| 286 |
|
Combustion chemistry of 1,3-cyclopentadiene
|
| 287 |
|
Combustion of Methane over Palladium Based Catalysts --- Catalytic Deactivation and the Role of the Support
|
| 288 |
|
Comparative char combustion kinetics and potential greenhouse gas reductions for alternative fuel-to-energy schemes
|
| 289 |
|
Comparison of commercial 3A zeolites for the ethanol-water separation using pressure swing adsorption
|
| 290 |
|
Comparison of Luus-Jaakola optimization procedure and genetic algorithms
|
| 291 |
|
Comparison of steam and autothermal reforming of methanol for fuel cell applications
|
| 292 |
|
Compatibilization of blends of PHA and polyvinyl alcohol
|
| 293 |
|
Competitive adsorption at air-liquid interfaces : A model for Acute Respiratory Distress Syndrome
|
| 294 |
|
Complex formation between cationic cellulose polymers and oppositely charged surfactants in aqueous media
|
| 295 |
|
Complex phenomena in heterogeneous materials (three case studies)
|
| 296 |
|
Composite Nafion/zirconium phosphate fuel cell membranes : operation at elevated temperature and reduced relative humidity
|
| 297 |
|
Composite Silver/Titania Photocatalysts for Visible Light Water Splitting : The Role of Silver Surface Plasmons
|
| 298 |
|
Comprehensive black liquor droplet combustion studies
|
| 299 |
|
A compression rheology model of batch centrifugal filtration
|
| 300 |
|
Computational and experimental characterization of nitrogen oxides adsorption on metal oxide surfaces and hydrocarbon oxidation on platinum
|
| 301 |
|
Computational and experimental studies of controlled release drug delivery : Effect of microsphere diameter and drug size on in-vitro release kinetics
|
| 302 |
|
Computational and theoretical investigation of mechanical strength in glasses and superheated liquids
|
| 303 |
|
Computational approaches for the modeling and analysis of biochemical networks
|
| 304 |
|
Computational de novo protein design with flexible templates
|
| 305 |
|
Computational fluid dynamics simulation of interfacial area concentration in a bubble column
|
| 306 |
|
A computational investigation of hydrocarbon cracking : Gas phase and heterogeneous catalytic reactions on zeolites
|
| 307 |
|
Computational investigations of molecular transport processes in nanotubular and nanocomposite materials
|
| 308 |
|
A computational model to predict the performance of flooded refrigerant evaporators
|
| 309 |
|
Computational nanofluid flow and heat transfer analyses applied to micro-systems
|
| 310 |
|
Computational studies of g-protein coupled receptors
|
| 311 |
|
Computational studies of plasma-surface interactions
|
| 312 |
|
Computational study of DNA-directed self-assembly of colloids
|
| 313 |
|
A computational study of the effects of viscoelasticity on the interfacial dynamics of free surface displacement flows
|
| 314 |
|
Computational tools for soft sensing and state estimation
|
| 315 |
|
Computationally probing the cybotactic region in gas-expanded liquids
|
| 316 |
|
Computer modeling of coating thickness, heat transfer and thermal residual stress in spray deposition processes
|
| 317 |
|
Computer Simulation of Drug-Encapsulating Copolymer Nanoparticles for Cancer Therapy
|
| 318 |
|
Computer simulation of self-assembly of complex system : Application to globular proteins and grafted nanoparticles
|
| 319 |
|
Computer simulations of protein folding and aggregation
|
| 320 |
|
Computer technology, education and disability : Experiences of postsecondary students who are blind or visually impaired
|
| 321 |
|
Concentration of flavor distillates and extracts by pervaporation
|
| 322 |
|
Conceptual design tool for supercritical systems
|
| 323 |
|
Condenser dryer analysis, design and research application
|
| 324 |
|
Confocal microscopy study of colloidal sedimentation and crystallization
|
| 325 |
|
Conjugated Polymer Design and Engineering for Organic Electronics
|
| 326 |
|
Constitutive modeling of slip, twinning, and untwinning in AZ31B magnesium
|
| 327 |
|
Construction material logistics : project manager level of satisfaction and facilities layout planning
|
| 328 |
|
The construction of palladium and palladium-alloy supported membranes for hydrogen separation using supercritical fluid deposition
|
| 329 |
|
Continuous coatings from particulate suspensions : polymer powder and latex coatings
|
| 330 |
|
Continuous hydrothermal synthesis and crystallization of magnetic oxide nanoparticles
|
| 331 |
|
Continuous production of microcellular foams
|
| 332 |
|
The contribution of chlorine radicals to tropospheric ozone formation in southeastern Texas
|
| 333 |
|
Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres
|
| 334 |
|
Control and characterization of thin films during confinement and shear
|
| 335 |
|
A control loop performance monitor
|
| 336 |
|
Control of amino acid starvation-induced apoptosis in CHO cell cultures
|
| 337 |
|
Control of corrosion in steel using polyelectrolyte multilayer nanofilms
|
| 338 |
|
Control of micro- and nano-sphere size distributions : Implications in drug delivery
|
| 339 |
|
Control of particle characteristics in the production of fine powder by grinding
|
| 340 |
|
Control of reactive distillation systems
|
| 341 |
|
A control performance monitor and a model performance monitor for process controllers
|
| 342 |
|
Control relevant identification for robust optimal control
|
| 343 |
|
Control-relevant process nonlinearity characterization
|
| 344 |
|
Controlled radical polymerizations in miniemulsions : Advances in the use of RAFT
|
| 345 |
|
Controlling changes in cell surface hydrophobicity reduces mass transport limitations in Rhodococcus biotransformations
|
| 346 |
|
Controlling guest-host interactions in self-assembled materials
|
| 347 |
|
Controlling stability of gold nanoparticles in mesoporous silica
|
| 348 |
|
Convective heat transfer scaling at the wall of circulating fluidized bed risers
|
| 349 |
|
Conversion of corn oil to alkyl esters
|
| 350 |
|
Convex relaxations and convex envelopes for deterministic global optimization
|
| 351 |
|
Copper gallium diselenide thin film absorber growth for solar cell device fabrication
|
| 352 |
|
Copper metallization in supercritical carbon dioxide: Applications and kinetics
|
| 353 |
|
Copper-catalyzed direct conversion of arene C-H bonds to C-C bonds
|
| 354 |
|
Correlations among surfactant drag reduction, additive chemical structures, rheological properties and microstructures in water and water/co-solvent systems
|
| 355 |
|
Correlations between molecular structure, aggregation, and rheology for telechelic associative polymers in aqueous solutions
|
| 356 |
|
Corrosion behavior of mild steel under atmospheric and accelerated conditions after treatment by several inhibitor solutions
|
| 357 |
|
Corrosion inhibition for an aluminum substrate bonded with an electrically conductive adhesive
|
| 358 |
|
Cosolvent effects in polymer-solvent systems
|
| 359 |
|
Cosolvent effects on protein stability : thermodynamic studies of model compounds
|
| 360 |
|
Crosslinked hollow fiber membranes for natural gas purification and their manufacture from novel polymers
|
| 361 |
|
Crosslinked network synthesis by radical chain photopolymerization : Natural and directed evolution of macromolecular structure
|
| 362 |
|
Crystal and liquid crystal structure of natural silk fibroin and synthetic polypeptides
|
| 363 |
|
Crystal structures of ebulin, a non-toxic ribosome-inactivating protein
|
| 364 |
|
Crystallinity enhancement of co-solvent induced titania-silica mixed oxides for the photocatalytic remediation of organic pollutants
|
| 365 |
|
Crystallization : the study of kinetics, solubility, polymorphism and phase transitions using differential scanning calorimetry
|
| 366 |
|
CRYSTALLIZATION AND FIBRIL FORMATION IN POLYMERS
|
| 367 |
|
Crystallization of diamond and diamond-like nitride films from gas phase
|
| 368 |
|
Crystallization of sodium chloride from a concentrated calcium chloride-potassium chloride-sodium chloride solution in a CMSMPR crystallizer : Observation of crystal size distribution and model validation
|
| 369 |
|
Crystallization of solutes that lead to scale formation in black liquor evaporation
|
| 370 |
|
Cultivation of human embryonic stem cell-derived embryoid bodies under defined environmental conditions for the production of hematopoietic cells
|
| 371 |
|
Cytochrome p450 4f isoforms in different species : identification, gene regulation and putative roles in inflammation
|
| 372 |
|
Data mining methods for quantitative in-line image monitoring in polymer extrusion
|
| 373 |
|
Data-driven approach for control performance monitoring and fault diagnosis
|
| 374 |
|
Data-driven qualitative and model-based quantitative approaches to fault diagnosis
|
| 375 |
|
De novo beta-sheet proteins : amyloid-like fibrils, self-assembling monolayers and monomeric structures
|
| 376 |
|
Defect engineering for controlling semiconductor diffusion
|
| 377 |
|
Deformation effects related to pin-tool geometry during friction-stir welding of aluminum alloy 6061
|
| 378 |
|
Degradation and reliability modelling of polymer electrolytemembrane (PEM) fuel cells
|
| 379 |
|
Dendrimer based delivery of therapeutic agents for thrombolysis and asthma
|
| 380 |
|
Dendritic cell migration and traction force generation in engineered microenvironments
|
| 381 |
|
Denitrification of high-strength nitrate wastewater using fluidized-bed biofilm reactors
|
| 382 |
|
Density Functional Theory (DFT) study of reaction pathways on gold and gold-alloy nanoclusters
|
| 383 |
|
Density functional theory study of activity and local structure of zeolites
|
| 384 |
|
Depletion and structural interactions in charged colloidal systems
|
| 385 |
|
Deposit formation dynamics and microstructure development during thermal spraying
|
| 386 |
|
The deposition and rheology of organic gels
|
| 387 |
|
Deposition of colloidal particles during sessile drop evaporation
|
| 388 |
|
Design and analysis of a titanium/nanocomposite pressure vessel for aerospace applications
|
| 389 |
|
Design and analysis of distributed feed solid oxide fuel cell stacks
|
| 390 |
|
Design and analysis of heptane reformer for hydrogen production for use in fuel cell applications
|
| 391 |
|
Design and analysis of novel photocatalytic materials
|
| 392 |
|
Design and economic assessment of biodiesel production from waste cooking oil
|
| 393 |
|
The design and evaluation of a continuous photocatalytic reactor utilizing titanium dioxide in thin films of mesoporous silica
|
| 394 |
|
The design and fabrication of autonomous polymer-based surfacetension-confined microfluidic platforms
|
| 395 |
|
Design and fabrication of microreactors for high temperature applications
|
| 396 |
|
Design and fabrication of polymer-based microfluidic platforms for BioMEMS applications
|
| 397 |
|
Design and fabrication of zeolite macro- and micromembranes
|
| 398 |
|
Design and interfacial activity of copolymers with controlled monomer sequence distributions
|
| 399 |
|
Design and modeling of pharmaceutical polymorphic crystallization processes
|
| 400 |
|
Design and optimization of chemically selective surfaces for binding organic molecules
|
| 401 |
|
Design and production of protein polymer drag-tags for application in free-solutionmicrochannel DNA sequencing
|
| 402 |
|
The design and synthesis of a true, heterogeneous, asymmetriccatalyst
|
| 403 |
|
Design and synthesis of flexible module-based systems
|
| 404 |
|
Design and validation of melt valves in polymer processing, 2003--2004
|
| 405 |
|
Design of a methanol to hydrogen micro-reformer for fuel cell applications
|
| 406 |
|
Design of aqueous two-phase protein extraction process
|
| 407 |
|
Design of energy absorbing materials and composite structures based on porous shape memory alloys (SE)
|
| 408 |
|
Design of hydrogen-bonded networks for the separation of polyunsaturated fatty acids
|
| 409 |
|
Design of input signals for the identification and control of multivariable systems
|
| 410 |
|
Design of macromolecular drug delivery systems using molecular dynamics simulation
|
| 411 |
|
Design of membrane-lytic peptides
|
| 412 |
|
Design of multivariable identification signals for constrainedsystems
|
| 413 |
|
Design of nanoporous polymer networks using a reactive encapsulation of solvent (RES) technique
|
| 414 |
|
Design of novel catalysts by infusion of presynthesized nanocrystals into mesoporous supports
|
| 415 |
|
Design of photocatalytic air cleaning reactors
|
| 416 |
|
Design of surfactant molecules for active and passive control of surface and bulk properties of aqueous solutions
|
| 417 |
|
Design of synthetic scaffolds for tissue regeneration applications
|
| 418 |
|
Design, fabrication & characterization of organic photovoltaicdevices
|
| 419 |
|
Design, fabrication and application of a microfluidic nanofiltration module for separation and purification of macromolecules and nanoparticles
|
| 420 |
|
Design, fabrication and characterization of bifurcating microfluidic networks for tissue-engineered products with built-inmicrovasculature
|
| 421 |
|
Design, fabrication, and integration of a fuel cell for a hybrid micro power system
|
| 422 |
|
Design, modeling, and testing of high performance RF bistable magnetic actuators
|
| 423 |
|
The Design, synthesis and application of easy wash off reactive dyes
|
| 424 |
|
Design, synthesis, and characterization of functional block copolymers containing fluorinated or hydrophilic segments by ATRP
|
| 425 |
|
Design, synthesis, and optimization of recoverable and recyclable silica-immobilized atom transfer radical polymerization catalysts
|
| 426 |
|
Designing nanoscale constructs from atomic thin sheets of graphene, boron nitride and gold nanoparticles for advanced material applications
|
| 427 |
|
Designing novel orthopedic implants based on an anodization platform
|
| 428 |
|
Destruction of volatile organic compounds in a dielectric barrier discharge plasma reactor
|
| 429 |
|
Detection and identification of microorganisms using a combined flow field-flow fractionation/spectroscopy technique
|
| 430 |
|
Determination of an empirical correlation for the mass transfer coefficients of pharmaceutical powders in a fluid bed dryer
|
| 431 |
|
Determining the nature and location of emission sources contributing to Toronto aerosol
|
| 432 |
|
Developing a Kinetic Model for Hydroconversion Processing of Vacuum Residue
|
| 433 |
|
Developing clean fuels : Novel techniques for desulfurization
|
| 434 |
|
Developing complex structures and functions through cell-directed assembly
|
| 435 |
|
Developing novel electrode materials in energy storage devices for hybrid electric vehicles
|
| 436 |
|
Development and analysis of three-dimensionally reinforced cellular matrix composites
|
| 437 |
|
Development and application of process analytical technology for fed-batch bioprocesses of the yeast Pichia pastoris
|
| 438 |
|
Development and application of solid-support methodology to dna nanoconstruction
|
| 439 |
|
Development and application of tools for modeling mass transport and catalytic reaction in nanostructured membranes
|
| 440 |
|
Development and applications of two-zone SMB processes for binary separations
|
| 441 |
|
Development and characterization of a poly(ethylene glycol) hydrogel scaffold system for adipose tissue engineering
|
| 442 |
|
Development and chemical engineering aspects of thermal lance cutting technology
|
| 443 |
|
Development and evaluation of P/M processing techniques to improve and control the mechanical properties of metal injection molded parts
|
| 444 |
|
The development and fabrication of miniaturized direct methanol fuel cells and thin-film lithium ion battery hybrid system for portable applications
|
| 445 |
|
Development and understanding of new membranes based on aromatic polymers and heterocycles for fuel cells
|
| 446 |
|
Development and validation of a computational model for a proton exchange membrane fuel cell
|
| 447 |
|
Development as degradation : Aquaculture, mangrove deforestation and entitlements in Baton, Philippines
|
| 448 |
|
Development of a catalytic process for the production of maleic anhydride from a fermentation feedstock
|
| 449 |
|
Development of a chromium-free consumable for joining stainlesssteels
|
| 450 |
|
The development of a continuous system for the production of powder caramel color
|
| 451 |
|
Development of a flame based process for controllable synthesis of ceramic nanoparticles
|
| 452 |
|
Development of a general thermal oil reservoir simulator under a modularized framework
|
| 453 |
|
Development of a high-throughput and fully-integrated bioanalytical microdevice for genetic analysis
|
| 454 |
|
The Development of a Hydrothermal Method for Slurry Feedstock Preparation for Gasification Technologies
|
| 455 |
|
Development of a molecular imprinting thick film electrochemical sensor for cholesterol detection
|
| 456 |
|
Development of a new optical imaging modality for detection of fluorescence-enhanced disease
|
| 457 |
|
Development of a novel ex vivo scaffold for the regeneration of periodontal tissues
|
| 458 |
|
Development of a novel microreactor for improved chemical reaction conversion
|
| 459 |
|
Development of a process for harmful algal bloom location prediction using GIS and trend analysis for the terrestrial waters of Kuwait
|
| 460 |
|
Development of a semi-preparative carbon-30 HPLC column for carotenoids separation
|
| 461 |
|
Development of a sensor to measure carbon monoxide, dihydrogen oxide concentrations and gas temperature using a 1.56 micron tunable diode laser
|
| 462 |
|
Development of active packaging for cosmetics and study of the migration of oxygen scavenger
|
| 463 |
|
Development of advanced technologies for biomass pyrolysis
|
| 464 |
|
Development of amperometric biosensors based on dehydrogenase enzymes
|
| 465 |
|
Development of an amperometric-mediated biosensor for fructose and its applications
|
| 466 |
|
Development of an open source chemical process simulator
|
| 467 |
|
Development of barrierless dielectrics and their integration with copper for nanodevice wiring
|
| 468 |
|
Development of batteries for implantable applications
|
| 469 |
|
Development of carbon molecular-sieve membranes with tunable properties : Modification of the pore size and surface affinity
|
| 470 |
|
The development of compression moldable polymer composite bipolar plates for fuel cells
|
| 471 |
|
Development of computational mass and momentum transfer models for extracorporeal hollow fiber membrane oxygenators
|
| 472 |
|
Development of coupled mercury fate-TRANsport, SPECiation and BIOaccumulation (BIOTRANSPEC) model : Application to Lahontan Reservoir, Nevada
|
| 473 |
|
Development of Crystallization Processes Aided by Phase Diagrams and Workflow
|
| 474 |
|
Development of dimethyl ether (DME) and carbon dioxide sensors using platinum nanoparticles and thick film technology
|
| 475 |
|
Development of direct hydrocarbon solid oxide fuel cells
|
| 476 |
|
Development of elastin-based biomaterials by polyethylene glycol conjugation to an elastin polypeptide
|
| 477 |
|
Development of electrocatalysts for fuel cell cathodes : experimental studies and mathematical modeling
|
| 478 |
|
Development of environmentally-friendly plasticized poly (vinyl chloride)-based flooring formulations
|
| 479 |
|
Development of enzyme-based sensor arrays
|
| 480 |
|
The development of high speed separation systems for the miniaturization of liquid chromatography
|
| 481 |
|
Development of high-definition photoresists for CRTs
|
| 482 |
|
Development of high-performance diamine-based polybenzoxazines
|
| 483 |
|
Development of highly reactive and durable copper oxide based regenerable sorbents for flue gas desulfurization
|
| 484 |
|
Development of inorganic resists for electron beam lithography : Novel materials and simulations
|
| 485 |
|
Development of lead zirconate titanate cantilevers on the micrometer length scale
|
| 486 |
|
Development of low-loading, carbon monoxide tolerant PEM fuel cell electrodes
|
| 487 |
|
Development of magnetoresistive biosensors for molecular diagnostics
|
| 488 |
|
Development of mass spectrometry for bacteria identification
|
| 489 |
|
Development of micro-grinding mechanics and machine tools
|
| 490 |
|
The development of microbatteries based on three-dimensional architectures for autonomous micro devices
|
| 491 |
|
Development of models to study the emissions, flow, and kinetic characteristics from diesel oxidation catalysts and particulate filters
|
| 492 |
|
Development of nanostructured biomaterials through photopolymerization within lyotropic liquid crystalline media
|
| 493 |
|
Development of new fabrication methods for solid oxide fuel cell electrodes
|
| 494 |
|
Development of novel adhesion and migration assays for cancerresearch
|
| 495 |
|
Development of novel magneto-rheological polymer gels and magneto-rheological fluids
|
| 496 |
|
Development of novel mesoporous silicates for bioseparations and biocatalysis
|
| 497 |
|
Development of novel nanopowder electrocatalysts for direct ethanol polymer-electrolyte-membrane fuel cells
|
| 498 |
|
Development of novel nanostructured electrodes for supercapacitors and PEM fuel cells
|
| 499 |
|
Development of novel unsupervised and supervised informatics methods for drug discovery applications
|
| 500 |
|
Development of oxidative lime pretreatment and shock treatment to produce highly digestible lignocellulose for biofuel and ruminant feed applications
|
